When a sewage spill occurs, you may need to contact a professional water damage restoration service such as Water Damage Near Me. However, you can also do it by yourself. So, to begin the process, you must cut off the power and water supply.

Likewise, the next step would be to clean the sewage spills. However, before getting down to that, there are some safety protocols that you must follow to protect yourself and others around you from health hazards.

Preventive Measures to Take Before Cleaning Sewage Spills Indoors

While you must clean sewage spills thoroughly, it is equally essential to protect those around you from harmful sewage chemicals, bacteria, and viruses. You must also pump standing water out, if any, to prevent health hazards.

Likewise, here are some other safety measures that you should take before cleaning sewage spills.

Steps to Take for Cleaning Sewage Spills Indoors

Cleaning sewage spills is by no means an easy job, mainly if it has occurred inside the house. However, by following specific steps, you can rid your home of sewage spills in no time. Now, as suggested, getting rid of sewage spills isn’t easy. So, as a first step and safety measure, you will need to wear protective gear, such as gloves, rubber boots, eyewear, and a face mask.

Once you have all these on, you can begin with the task. You will need to follow the steps outlined below to get rid of the sewage spills.

  1. Wear protective gear and make sure that you don’t directly contact the contaminants.
  2. Shut the doors of unaffected rooms to prevent the sewage water, dust, debris, and other contaminants from seeping into them.
  3. Begin the process by removing the sewage water using a suitable pump if there is too much water. You can as well use a vacuum cleaner or another filtration tool.
  4. Use a shovel to remove the dirt and debris formed, put them into plastic covers, and dispose of them.
  5. Isolate all affected items.
  6. Remove the dirt from affected flooring, carpets, insulation, wall panels, and other items, and get rid of them safely.
  7. Wash all the floors, walls, and other affected surfaces with a disinfectant and hot water solution.
  8. Deep-cleanse the house using a detergent and water. Also, clean the floors thoroughly by scrubbing them with a brush dipped in a solution of water and chlorine bleach.
  9. Take out any remaining water from the affected areas and let them dry. Alternatively, you could also air-dry them using a dehumidifier. However, be sure to dry the wet surfaces or areas within 24 to 48 hours of the spill.
  10. Check your house or building for any mold growth due to the excess moisture caused by the spill. If you find any, start the removal process immediately using an EPA-approved mold cleaner and disinfect the surfaces to prevent its spread.
  11. Lastly, dispose of all consumable and porous items such as carpets, curtains, and rugs that directly contact the sewage water. Also, wash all the affected items with chlorine bleach and water solution. 

Once you finish the cleaning process, check all the electrical and plumbing connections, and see if they have come in contact with the sewage water. If so, get them repaired and decontaminated.


Remember that cleaning sewage spills isn’t an easy task and may not be safe to do by yourself. So, it would be better to get help from a professional water damage restoration service such as Water Damage Near Me. However, when doing it yourself, be sure to complete the cleaning process between 24 and 48 hours of the spill.

So, to sum up, the following table shows the steps you should take to rid your house of sewage spills.

Sl. No. Steps Involved Details
1 Wear protective gear Be sure to wear protective gear before starting with the process.
2 Shut the doors and windows Close the doors and windows of all the unaffected areas.
3 Begin with the cleaning process Begin by removing the dirt and debris from all the affected areas.
4 Cleaning Wash all the affected floors and other surfaces using a suitable disinfectant and water.
5 Deep-Cleansing Deep-cleanse the affected areas using a solution of chlorine bleach and water.
6 Remove excess water Take out the excess or remaining water from the cleaned surfaces.
7 Check for mold growth Check your house thoroughly for signs of mold growth and remove them immediately if you find any.
8 Dispose of the affected items. Finally, ensure that you get rid of or clean all the items affected by the sewage spill.